|
Where can I find the pinouts for the Palm Connector Plugs PCP-01/PCP-02.
Posted by D. Martinelli on 02 March 2007 04:21 PM
|
Both the PCP-01 and the PCP-02 have the exact same pinouts.  
| | Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
Pin 9
Pin 10
Pin 11
Pin 12
Pin 13
Pin 14
Pin 15
Pin 16
| GND
USB_D+
USB_D-
VBUS
HOTSYNC
NC
GND
ID
Vout
RxD
TxD
DETECT
CTS
RTS
DTR
CHARGE
| Signal- and charge ground (connected to pin 7)
Positive USB data signal
Negative USB data signal
USB VBUS signal
HotSync IRQ - +3.3V for button push
Not Connected
Signal- and charge GND (connected to pin 1)
Identification for peripherials
+3.2V supply output, 100mA max.
RS-232 RxD signal (input)
RS-232 TxD signal (output)
peripherial detect - tied to ground by peripherials
RS-232 CTS signal (input)
RS-232 RTS signal (output)
RS-232 DTR signal (output)
+5V charge supply input, 500-700mA
|
|
|
